163 Time and date not set

We now use computers every day, they offer us many convenient services. But we should also acknowledge how to set its settings to make sure they would work properly. And HP desktop is a top brand in desktop industry. As being widely used in many companies, it has also prompted some basic problems due to different reasons in HP desktop. So here we will focus on how to fix 163 time and date not set error in HP desktop.

When 163-time and date not set error happened, you will see the picture attached below.

To solve this problem, you should follow our guidelines. Don’t worry, you can handle it very quickly.

Step 1: Turn your target desktop on and press F10 key as soon as possible to boot to setup utility.

Step 2: When you get into the HP setup utility, you can find some items listed on the top bar. Go and find the item called File, just click it to open its sub-category. Find and click Set Time and Date option. Correct the right date and time then press F10 to activate your changes in setting.

Note: You can use direction keys in your keyboard to navigate to the option you need and press Enter key to begin making some settings.

Step 3: Then navigate to the option called Save Changes and Exit and click Enter key to end this operation. Restart your desktop.

Related Articles:

iSunshare is dedicated to providing the best service for Windows, Mac, Android users who are in demand for password recovery and data recovery.

Copyright В© 2020 iSunshare Studio All Rights Reserved.

Premium Content
Premium Content
  • Facebook
  • Twitter
  • LinkedIn
  • https://www.experts-exchange.com/questions/24294118/163-Time-and-Date-not-set.html copy

Boot into your BIOS and apply the setting in there?

Doesn’t seem to be a solution from Googling. Looks like a total failure of some type.

You could try it without a hard disk and see what happens.

Remove battery out and leave computer overnight. Replace battery and see what happens.

But from the Google hits it looks like it’s dead.

163-Time & Date Not Set Invalid time or date in configuration memory.

RTC (real-time clock) battery may need to be replaced. Reset the date and time under Control Panel (Computer Setup can also be used). If the problem persists, replace the RTC battery. See the Hardware Reference Guide on the Documentation and Diagnostics CD for instructions on installing a new battery, or contact an authorized dealer or reseller for RTC battery replacement.
163-Time & Date Not Set CMOS jumper may not be properly installed. Check for proper placement of the CMOS jumper if applicable.

Acronis in Gartner 2019 MQ for datacenter backup

It is an honor to be featured in Gartner 2019 Magic Quadrant for Datacenter Backup and Recovery Solutions. Gartner’s MQ sets a high standard and earning a place on their grid is a great affirmation that Acronis is delivering on our mission to protect all data, apps, and systems.

I dont know how long you waited before you replaced the cmos battery when you took it out try these steps to see if it will clear it

2. Wait approximately 5 minutes.
3. Replace the RTC battery and reassemble the computer.
4. Connect AC power to the computer. Do not reinsert any
batteries at this time.
5. Turn on the computer.
All passwords and all CMOS settings have been cleared.

"I can’t enter the time and date in the BIOS. There is no line to enter that information."
This is not a normal behavior you shuold be able to change the time and date to what ever is correct. What is the time and date that you see in it? Is it the same with every reboot like does it reset? Does it look like its moving up for as long as you keep the battery in?

‎07-24-2010 11:59 AM

I got a hp compaq nx6310.

The HDD is formatted and when turn the pc on it load the HP screen and opts to go into BIOS which I can access and modify options work fine. But then it comes up with "Error 163 time and date not set".

If I get a Ubuntu CD and try to run the live install it will not load and will stuck on a black screen with a flashing underscore character .

If I load any windows it will boot from the CD and load all dll and kernel but it stuck on "Setup is starting windows"

Previoully I have tried to run a HDD and RAM test which both have passed.

I also follow some tips I googled such as:

Reset the BIOS settings,

configure CPU DUAL to Disabled

Configured the SATA to disabled.

Still no luck. It does not looks like I can actually run any OS in there.

I also search Hp website for BIOS update but I only download *.exe files and I can´t run it as I can not load any OS.


[an error occurred while processing the directive]
Карта сайта